Toecap: 200J polymeric composite non-thermic
Upper: Suede leather 1,8-2,0 mm and PU coated anti-scratch leather Hydro Internal lining Windtex® waterproof membrane
Midsole: PS certified antiperforation dielectric composite fabric
Insole: Dielectric insulating foam open-cell polyurethane extra comfort
Sole: Rubber/Outsole, PU/Midsole
Other:
20.000V Sole Insulation (ASTM 2413-11, C.S.A. Z195-14, INSULATING SOLE FROM 1.000 MΩ)
Water Resistant
HRO +300°C
High safety shoe, WPA anti-scratch back leather thickness 1,8-2,0 mm.
Highly perspiring and abrasion resistant fabric lining.
Soft, Windtex® water resistant membrane lining, with very good perspiration and abrasion resistance.
Shoe with refracting fabric insert.
COMPLETELY METAL FREE SHOETOECAP
SHOE TOECAP polymeric composite non-thermic according to EN 22568.
PL MIDSOLE flexible antiperforation composite INSULATING fabric according to EN 22568.
SOLE HARD ROCK INSULATING bidensity polyurethane and INSULATING RUBBER resistant to hydrocarbons and to abrasion, anti-shock and anti-slipping.
Article HRD057E has been tested using a method analogous to ASTM F2413-24 (EH) and CSA Z195-14: determination of resistance to an electric shock, increase 1 kV/sec, voltage 20,000 V/60 Hz holding the voltage for 1 minute. Electrical current requirement below 1.0 mA.
The outsole of the footwear, within specific limits (in the absence of moisture, not referring to the upper), was tested using a method analogous to EN ISO 20345:2022 to provide electrical insulation against voltages up to 1000 V M ohm >1000.
(Test report No. 4325006.01/EA)
DIELECTRIC INSOLE bimaterial extracomfort with activated carbon, breathable, removable, anatomical, absorbent, insulating and antibacterial.
Environmentally Sustainable Eco-Friendly.
FO Hydrocarbon-resistant sole.
E energy absorption on seat region.
PS sole resistance to perforation non metallic (nail Ø3,0mm).
CI cold insulation of sole complex -17°C
HI heat insulation of sole complex
HRO resistance to hot contact of the outsole.
WR water resistant shoe.
SR sole resistance against slipping.
THIS PRODUCT COMPLIES WITH THE REQUIREMENTS OF THE STANDARD ASTM F2413-24:
Impact resistant footwear (I)
Compression resistant footwear (C)
Puncture Resistant Footwear (PR)
Electric Hazard Resistant Footwear (EH)
Slip Resistance (SRO)
