Volt

Low safety shoe, suede back leather thickness 1,8-2,0 mm.

External 3D fabric, perspiring and abrasion resistant.

Soft, lined and padded tongue.

COMPLETELY METAL FREE SHOETOECAP

SHOE TOECAP 200J polymeric composite non-thermic according to EN 22568.

PL MIDSOLE fabric INSULATION composite flexible anti-perforation according to EN 22568.

SOLE HARD ROCK INSULATING bidensity polyurethane and INSULATING RUBBER resistant to hydrocarbons and to abrasion, anti-shock and anti-slipping.

Article HRD055H has been tested using a method analogous to ASTM F2413-24 (EH) and CSA Z195-14: determination of resistance to an electric shock, increase 1 kV/sec, voltage 20,000 V/60 Hz holding the voltage for 1 minute. Electrical current requirement below 1.0 mA.

The outsole of the footwear, within specific limits (in the absence of moisture, not referring to the upper), was tested using a method analogous to EN ISO 20345:2022 to provide electrical insulation against voltages up to 1000 V M ohm >1000.

(Test report No. 4351088/E)

DIELECTRIC INSOLE bimaterial extracomfort with activated carbon, breathable, removable, anatomical, absorbent, insulating and antibacterial.

Environmentally Sustainable Eco-Friendly.

FO Hydrocarbon-resistant sole.

E energy absorption on seat region.

PS sole resistance to perforation non metallic (nail Ø3,0mm).

HRO resistance to hot contact of the outsole.

SR sole resistance against slipping.

THIS PRODUCT COMPLIES WITH THE REQUIREMENTS OF THE STANDARD ASTM F2413-24:

Impact resistant footwear (I)

Compression resistant footwear (C)

Puncture Resistant Footwear (PR)

Electric Hazard Resistant Footwear (EH)

Slip Resistance (SRO)

Giasco.Volt.TDS